Océ Quick Start
Page 3 of 24
1) Introduction to the system
⇒
The Océ CS620/CS650 Pro is a machine producing up to 65 B/W / full colour pages. Via the trays 1, 2, 3 and 4 (CS650 Pro) it is possible to feed
64-256 g/m
2
. Via tray 5 (CS650 Pro), the multisheet bypass (CS620) and the optional bulk tray (CS620) it is possible to feed 64-300 g/m
2
.
The CS620 is available with a booklet finisher, large capacity unit (bulk tray) and optional punch kit and post inserter. The booklet finisher has
2-point and corner stapling, center fold and threefold capacities.
The CS650 Pro is available in various configurations, for example with:
•
a staple finisher
•
a multi folding unit with punch kit and post inserter
•
a high capacity stacker
•
a booklet maker
2) Turn On and Off the engine
The machine has 2 power switches:
•
the main power switch (used mainly by the service engineer)
•
the sub power switch
The main power switch turns on/off all functions of the machine. Normally, the main power switch is and remains turned on.
⇒
To turn On the print engine:
1.
Open the front door of the engine. The main power switch is located at the upper left hand side.
2.
Set the main power switch to [ I ]. The power LED on the control panel will light red.
3.
The sub power switch is located at the front of the machine. Turn on the sub power switch [ I ]. The power LED on the control panel will light
green.
The sub power switch turns on/off machine operations, for example copying, printing or scanning. When the sub power button is turned off, the
machine enters an energy save mode.
