Oce CS230 Phase 3, Руководство пользователя, Страница: 579 / 686

Utility 13
CS230 (Phase 3) 13-39
13.4 Specifying administrator settings
This section describes the main parameters and operations that can be
performed after pressing the [Utility/Counter] key, then touching [3
Administrator Setting].
System setting
Power save setting
Output setting
2
Reminder
The "Output Tray Setting" parameter is available only if optional finisher
FS-507 is installed.
Parameter Description Default Setting
Low Power Mode Set-
ting Specify the desired length of time (be-
tween 10 and 240 minutes) until the ma-
chine enters Low Power mode. 15 minutes
Sleep Mode Setting Specify the desired length of time (be-
tween 15 and 240 minutes) until the ma-
chine enters Sleep mode. 30 minutes
Power Save Key Select which low power mode is entered
when the [Power Save] key is pressed.
• Low Power:
The touch panel goes off and the ma-
chine enters a mode where it con-
serves energy.
• Sleep:
Although the machine conserves
more energy in Sleep mode than in
Low Power mode, the machine must
warm up when Sleep mode is can-
celed, therefore taking more prepara-
tion time than Low Power mode.
Low Power
Entering Power Save
Mode (Fax) Specify settings for faxing. For details,
refer to the Facsimile Operations and the
Network Facsimile Operations of the
CS230 user manual. Normal
Parameter Description Default Setting
Print/Fax Output Set-
tings Specify settings for faxing and printing. For details, refer to the Fac-
simile Operations and Print Operations of the CS230 user manual.
Output Tray Setting Select the copy exit tray for each type of
job (copies, printouts, faxes and re-
ports). Copy: Tray 2
Print: Tray 2
Report Output: Tray 1
Fax: Tray 1