5
SUPPLIES
Standard supplies for this product that can replaced by the user include paper, toner cartridges, and staple cartridges for
the finisher.
Be sure to use only Océ-specified products for the toner cartridges, finisher staple cartridge, saddle stitch finisher staple
cartridge, and transparency film.
For best copying results, be sure to use only Océ supplies which are designed, engineered, and tested to maximize the
life and performance of Océ products.
Storage of supplies
Proper storage
1. Store the supplies in a location that is:
• clean and dry,
• at a stable temperature,
• not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
3. Paper stored in packages standing up or out of the wrapper may curl or become damp, resulting in paper misfeeds.
Storing toner cartridges
Store a new toner cartridge box horizontally. Do not store it standing on end. If stored standing on end, the toner may not
distribute well even after shaking the cartridge vigorously, and will remain inside the cartridge without flowing out.
Staple cartridge
The finisher and saddle stitch finisher require the following staple cartridge:
481-8
Staple cartridge for finisher (approx. 5000 per cartridge x 3 cartridges)
794-5
Staple cartridge for saddle stitch finisher (approx. 5000 per cartridge x 3 cartridges)
Supply of spare parts and consumables
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of
production. Spare parts are those parts of the machine which may break down within the scope of the ordinary use of
the product, whereas those parts which normally exceed the life of the product are not to be considered as spare parts.
Consumables too, are available for 7 years following the termination of production.
cm2510_4010_us_saf.fm 5 ページ ２００６年１１月２７日 月曜日 午後３時１８分
