Notice for Users in U.S.A.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Model names (peripheral devices)
9501*
1
, 9502*
1
, 9509*
2
, 9511*
2
, 9503, 9504, 9505, CM2510030, 9506, 9507, CM2510050*
1
, CM4010020*
2
, ZB3500160, CM2510190
*1 Can be installed when using the cm2510.
*2 Can be installed when using the cm4010.
Model Number: cm2510 / cm4010
cm2510 J / cm4010 J
Warranty
While every effort has been made to make this document as accurate and helpful as possible, Océ Imagistics Inc. makes no warranty
of any kind with regard to its content. All information included herein is subject to change without notice. Océ is not responsible for any
loss or damages, direct or indirect, arising from or related to the use of this operation manual.
© Océ 2007. All rights reserved. Reproduction, adaptation or translation without prior written permission is prohibited, except as
allowed under copyright laws.
Each instruction also covers the peripheral devices used with these products.
Caution!
For complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
FOR YOUR RECORDS ...
To protect against loss or theft, record and retain for reference the machine's serial number located at the bottom of the back of the
left side of the machine.
Model Number
Serial Number
Date of Purchase
Place of Purchase
Authorized Océ Printer
Service Department Number
WARNING:
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the
manufacturer could void the user's authority to operate this equipment.
Shielded interface cables must be used with this equipment to maintain compliance with EMC regulations.
cm2510_4010_us_saf.fm 0 ページ ２００７年１月９日 火曜日 午後６時１１分
