05
Safety precautions
Read through the mounting/
use instructions carefully before
installing the luminaire. Follow
the safety precautions in these
instructions closely and keep the
instructions in a safe place.
This symbol warns you of a dan-
gerous situation which could lead
to serious injury or even death if
the instructions are not observed.
It also draws your attention to
possible material damage and pro-
vides other important information
in connection with this product.
The assembly and installation of
electrical components must be
carried out only by qualified per-
sonnel. Repairs must be carried
out only by authorised, qualified
personnel or the manufacturer.
Before performing any work on the
luminaire (installation, cleaning,
etc.), it must be disconnected
from the mains supply.
This symbol draws your attention to
situations in which you could look
directly into the light of the LED.
This may cause an after-image
effect and may result in damage
to the eyes if you look at the light
directly for prolonged periods.
0.2 m
Maintain the minimum safety
distance from flammable materials:
20 cm.
This symbol warns you of hot
surfaces, which could cause burns
if touched.
Caution: When used for prolonged
periods, the surface of the lumi-
naire can become hot. Before
performing any work on the
luminaire (fitting the luminaire etc.),
always switch the luminaire off and
let it cool for at least 30 minutes.
Содержание Mito alto up
