Use And Care Instructions
1. Before using and reusing, inspect the product carefully. Discard any product that has cut,
damaged or frayed wire insulation cords, cracked lamp holders or enclosures, loose connec-
tions, or exposed copper wire.
2. Wipe the unit with a damp cloth and allow the unit to dry before storing.
3. When storing the product, carefully remove it from wherever it is placed, including trees,
branches, or bushes to avoid any undue stain or stress on the product conductors, connec-
tions and wires.
4. When not in use, store neatly in a cool, dry location protected from sunlight.
User Servicing Instruction
Troubleshooting
Problem: The unit is not inflating.
- The power source is disabled or the cord may be unplugged. Check all power cables to make
sure that they are properly connected to a power source. Ensure that the power outlet has
power.
- Debris may be lodged in the motor. Unplug fan unit and remove any foreign objects or debris
from the motor.
NOTE: Periodically, the inflatable air-intake area may become clogged with grass, leaves or
other debris. For best results, it is recommended to check this air-intake area and clean as
necessary.
- Occasionally, the hanging fabric of a partially inflated inflatable can become attached to the
motor’s air- intake area. Ensure that fabric is not hanging near the motor during inflation.
- The zippers that seal the inflatable may not be completely closed. Make sure the zipper is zipped
closed.
- The temperature may be below 14ºF (-10ºC). Remove the unit from extreme temperatures until
weather conditions improve.
- The connection between the inflatable and fan may not be securely attached.
Problem: The unit is torn.
- You may hand sew rips with any type of thread or use clear packing tape to cover the tear.
Questions or Problems?
Visit our website www.toysinquiry.com or call our customer service department at
1-800-434-6178 for expedited assistance.
6
5
Replace the fuse:
1. Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling on the cord.
2. Open the fuse cover.
Slide opens the fuse
access cover on top of
the attachment plug
towards blades. (See
Illustration)
3. Remove fuse carefully.
4. Risk of fire: Replace fuse only with 5 Amp,
125V fuse (provided with product)
5. Close the fuse cover. Slide close the fuse
access cover on top of the attachment
plug.
6. Risk of Fire: Do not replace the
attachment plug. Contains a safety device
(fuse) that should not be removed. Discard
product if attachment plug is damaged.
CAUTION:
To reduce the risk of fire or electric
shock, do not attempt to replace lamps or
modify string.
CAUTION:
To reduce the risk of fire do not
deliberately reposition either lamp holder
contact.
CAUTION:
Do not attempt to inflate your
inflatable during unusually strong winds. If it
becomes too windy for safe
operation, simply allow your inflatable to
deflate and wait for better conditions before
re-inflating.
CAUTION:
Protect the electric fan and power
cord from direct exposure to water. This
precaution will reduce the risk of electrical
shock. When the temperature is below 14˚F
(-10˚C), the motor may temporarily stop
running. The motor will begin functioning
again in higher temperatures.
