Caution:
1. For even better night time illumination, you may choose to place an outdoor approved spotlight
in front of your inflatable. (Outdoor approved spotlight not provided). Do not place the bulb too
close to the inflatable as it may melt or damage the plastic.
2. Do not place any foreign objects inside your inflatable.
3. Do not block air intake area of your inflatable; it will increase the inflation time.
4. During inclement weather conditions such as heavy rain, snow and windstorms, store the
product indoors.
5. Operation of your inflatable during extreme weather conditions is not recommended.
6. Do not store the inflatable when it is wet.
Important Safety Instructions: Power Unit
This power unit is intended to be correctly orientated in a vertical or floor mount position. When
using electrical products, basic precautions should always be practiced including the following:
1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Read and follow all instructions that are on the product or provided with the product.
3. For a cord-connected or direct plug-in power unit, do not use an extension cord.
4. Reference the National Electrical Code, ANSI/NFPA 70, specifically for the installation of
wiring and clearances from power and lighting conductors.
5. Installation work and electrical wiring must be done by qualified person(s) in accordance with
all applicable codes and standards, including fire-rated construction.
6. For a cord-connected or direct plug-in power unit, do not install or use within 10 feet of a
pool.
7. For a cord-connected or direct plug-in unit, do not use in a bathroom.
8. For a direct plug-in or cord-connected power unit marked in accordance with 65.2:
WARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A
GFCI protected receptacle that is weatherproof with the power unit connected to the
receptacle. If one is not provided, contact a qualified electrician for proper installation.
Ensure that the power unit and cord do not interfere with completely closing the recep-
tacle cover.
9. For a permanently connected power unit marked in accordance with 65.2:
WARNING: Risk of Electric Shock. When used outdoors, install only on a circuit protected
by a Class A GFCI.
10. WARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a
building structure. Consult a qualified electrician.
11. For a unit intended to be mounted greater than 0.30 m (1 foot) from the ground surface:
WARNING: Risk of Electric Shock. Mount the unit at a height greater than 1 foot from the
ground surface.
SAVE THESE INSTRUCTIONS
– This manual contains important safety and operating
instructions for power units.
Package Contents
Part Description
Quantity
A
Inflatable Unit
1 PIECE
B
Air Blower
1 PIECE
(Input 110-120V
AC 0.54A, 60Hz)
C
Tether Ropes
4 PIECES
D
Tether Stakes
4 PIECES
E
Stakes
7 PIECES
F
Extra Fuse
1 PIECE
1
2
3
4
4
5
weight-bag
6
3
4
E
C
A
B
D
Assembly Introduction
1. Lay out deflated inflatable on a clear and
flat. Make sure the blower is clear of fabric
or other obstructions.
2. Ensure zipper on inflatable is fully closed.
3. For outdoor use, tie tether ropes to the
stakes, clip the nylon loops on the side of
inflatable, then insert stakes to the ground
making sure tethers are taut.
4. Insert 3 stakes through the plastic legs of
the blowers to fix the blower to the ground.
5. Plug the blower into a power unit. Inflatable
will start to inflate.
6. Adjust the sealed weight-bag to position
your inflatable.
7. To deflate, unplug adaptor and the fan will
stop blowing.
8. Unzip the zipper for faster deflation.
F
