OC Hot Tubs Serenity, Руководство пользователя

Страница: 9 / 44

Pr
eparing f
or
Your Ne
w P
or
tab
le Spa
7
OC Hot Tubs Owner’s Manual
LTR50001045, Rev. N
3. Fill the spa.
Never fill your spa with soft water.
Soft water makes it impossible to maintain the
proper water chemistry and may cause the water
to foam, which will ultimately harm the finish of
the spa and void your warranty. You may fill your
spa with well water provided the following
conditions are met: 1) Purchase and use a pre-
filter to run the well water through on the fill-up.
The pre-filter will be placed before the spa filter in
the fill-up flow of water. 2) Have a Total Dissolved
Solids (TDS) and metals test performed by a
qualified person after the fill-up process but before
any spa use.
Place a garden hose in the filter canister and fill your spa .
Always fill the spa through the filter canister. Failure to do so may cause air to be trapped in the filtration system and
prevent the pumps from operating properly.
Fill the spa until water level is about six inches from the top.
If the water level is too low or too high, your spa will not
operate properly.