OC Hot Tubs Serenity, Руководство пользователя

Страница: 8 / 44

Pr
eparing f
or
Your Ne
w P
or
tab
le Spa
6
OC Hot Tubs Owner’s Manual
LTR50001045, Rev. N
Inspect all plumbing connections in the
equipment area of your spa.
• Make sure unions in the equipment pack are tight. (Be careful
not to over-tighten the plumbing fittings.)
• If your spa has gate
valves, make sure they
are all in the UP or OPEN
position.
• Make sure the drain
valve is closed and
capped. (See page 30 for
a description of drain
valves.)
Filling and Powering Up Your Portable Spa
Never run the spa with the gate valves closed or without
water circulating for long periods of time.
1. Inspect the spa equipment.
If you have a skimmer like this:
After you remove the filter, remove the plastic wrapper and soak it in water for 30 minutes before you
replace it. A dry filter can allow air into the filtration system which can cause the pump to fail to prime.
Rotate and remove the black locking ring. Remove the
black skimmer cap and barrel, grip the filter by the
handle and unscrew it from the canister.
Replace and lock the locking ring and slide the skimmer
cap and barrel back in the canister.
Note: The skimmer cap and barrel were locked in place
at the factory to prevent damage during shipment. It
must be unlocked and replaced in the filter canister so that
it can float when the spa is filled. If you do not remove the
cap and barrel, your spa’s filtration system will not perform
as it was designed to.
Teleweir filter
skimmer
• 50 square feet
filtration
• Spoked cap
2. Remove the cartridge from the canister.