Overview
The AcquiLite™ data acquisition system is designed to allow owners and managers of commercial and industrial facilities
with a cost-effective means of gathering crucial information in a timely manner. To meet these requirements, the
AcquiLite™ system provides the installer with all the tools necessary to install and configure the hardware and software with
a minimum of time and investment.
Installation Checklist
An AcquiLite™ system installation has the following components:
Required hardware
●
AcquiLite™ A7810 data acquisition server (required)
●
Ethernet connection.
●
Ethernet Cat 5 cable (required for LAN or direct laptop-to-AcquiLite connection)
●
Power Supply: 24VDC
Optional hardware
●
Additional pulse output devices such as a power meter.
●
2 wire, twisted pair for pulse input connection.
LAN information:
●
Ethernet 10/100Mbit connection point (hub or switch)
●
IP address and Netmask (check with system administrator)
●
Gateway address (check with system administrator)
●
DNS server address (check with system administrator)
●
HTTP Proxy address (optional), may be required if the AcquiLite is behind a firewall (check with system
administrator)
3
Insulation connected to meters inside high voltage panels should have an insulation rating in excess of the service voltage.
Consult a licensed electrician and local building codes for further requirements that may apply.
Markings and Symbols:
WARNING: A potential risk exists if the operating instructions are not followed
General Warning Symbol: This symbol indicates the need to consult the operating instructions provided with the
product.
This symbol indicates the presence of electric shock hazards.
This symbol indicates: Do not apply to or remove from hazardous live conductors.
Direct Current symbol.
Page 4
A7810 AcquiLite – Data Acquisition Server
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
