obsta OBSTAFLASH Led, Инструкция по установке и эксплуатации

Страница: 24 / 24

24
* Procedure to test the power cards and the projectors:
- D6, D7 or/and D11 is/are blinking red: 1 or more projectors are not working in white
For example if luminous indicator D7 (or WHITE#2) is red blinking, disconnect the green terminal from its power card
and plug it to the power card for example D8 (or WHITE#3) close to it.
- If the luminous indicator D8 does blink also, it means the projector is defective
- If the luminous indicator D8 does not blink, it means the projector is ok but the power card linked to WHITE#2 is
defective
-D12 is blinking red: 3 or 6 projectors are not working in red
If the 6 projectors not working in red, change the power card,
If 3 projectors are not working, disconnect their related circuit from the green connector of the power card and connect it
to the second green connector of the power card: If the 3 projectors are ok, change the power card otherwise you have to
test which projector out of the 3 projectors is not working
SECTION 6 – SPARE PARTS
Beacon-obstaflash
PROJECTOR-RW-0.75..…………………………..…..……..113761
Power supply
COMMAND-CARD-48VDC-6P-RW………….………….....113744
POWER CARD 48VDC..……………………….……………113741
SECURITY SWITCH AND TEST BUTTON………………...113743
PHOTOCELL 50LUX 48VDC………………………………..100755
DS215-230/G………………………….…..………………….. 451721
POWER SUPPLY 230VA 600W……......................………….113742
Cable
Special Shielded outdoor cable (white only or dual color)..…….113762
GPS interface (option)
GPS-24/48-I…………… ………………………………..…….113746