obsta OBSTAFLASH Led, Инструкция по установке и эксплуатации

Страница: 16 / 24

16
SECTION 3 : INSTALLATION
3.1
Unpacking
Carefully unpack each item and remove any internal packing material from the power supply, the batteries and
the beacons. Examine each item for obvious physical damage. Report any claims to the carrier immediately.
3.2
Mounting and Preparation
3.2.1 OBSTAFLASH beacons
The lights are usually mounted at the highest point on the structure on a vertical platform, or as per
requirements of the local Aviation Regulation authority in place at the installation location.
3.2.2 Connection of the beacon to the power supply
3.2.2.1
Connection of the 6 led projectors to their junction box or the their power supply
Each beacon includes 6 dual color projectors with molded cable and plug at their extremity that are
already connected on the junction box or on the power supply.
However in the event that they
should be disconnected, it is very important that the 6 plugs of each projector be correctly
mounted and tightened in the 6 sockets of the junction box and also scotch added.
3.2.2.2 Connection of the interconnecting cable P/N 113762 to the junction box (option)
The interconnecting cable P/N113762 provided by OBSTA comes with a plug on one side to be
connected on the junction box
Connection of the cable P/N13762 on the junction box:
3.2.2.3 Connection of the interconnecting cable P/N 113762 to the power supply (option)
Entries of cables are on the lower side of the power supply .
3.2.2.4
Connection directly with cable (option)
With certain systems , the end user will use directly the standard shield cable.
WARNING: It is very important to respect the wiring of the cable P/N 113762 or between the standard
cable to TB1 and the 7 power cards in the power supply and the junction box.