background image

32

www.Observint.com

6.  Configure the motion alarms for the camera you are configuring, change the following parameters as needed: 

 

Buzzer

: The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in seconds when the 

motion is detected.

 

Alarm Out

: Optional function. If your NVR support to connect to external alarm device, you can set to emit an alarm 

tone.

 

Latch Time

: To configure the external alarm time when motion is detected. 

 

Record

: Click the settings icon and choose which channel(s) you want to record when the motion detection is triggered.

 

Post Recording

: You can set how long after an event occurs that the NVR will continue to record. The recommended 

recording length is 30 seconds but it can be set higher up to 5 minutes.

 

Show Message

: Check the select box to display the motion icon on the live view screen when the motion is detected. 

 

Send Email

: You can let the NVR to send you an auto-email when the motion is detected. You must configure your 

email settings to use this feature. See “6.3 Email setup” on page 48.

 

Full Screen

: If this function is enabled and a motion is detected in a channel, you will see that channel in full screen.

 

Picture to Cloud

: Select this option to upload a picture (capture) of the event to your cloud server. The Cloud server 

must be configured. See “7.2 Cloud settings” on page 53. 

 

Video to Cloud

: Select this option to upload video of the event recorded on the HDD to your cloud server. The Cloud 

server must be configured. See “7.2 Cloud settings” on page 53. 

7.  Click 

Save

 to retain your settings. You can also click 

Copy

 to use the alarm settings with other cameras.

8.  Right click the mouse to return to the 

Motion

 menu. 

3.2.10  PIR

Use the PIR menus to define a detection areas for cameras that senses for a heat signature (PIR). Only PIR capable cameras can be 
configured for PIR detection. To improve the efficiency of your system, sense for PIR only in areas of the field of view where PIR 
sensing is valuable. 

SECTION 3: CHANNEL - LIVE DISPLAY

Содержание N4






















































































































Отзывы: