Observint HDV-SYSNB2WFL, Руководство пользователя

Страница: 28 / 68

28
Motion status: Shows when the motion is not detected, or shows
when the motion is detected.
Copy:
Click to copy parameter setup for CH1 to all channels and choose which channel(s)
you want to record when the motion detection is triggered.
Default : Click Default to use default parameters.
Apply : When you set any parameter, always click the Apply icon the save the setting.
5.3.2 Exception
Use this menu to set the type of events you want the NVR to report.
Event Type : Select the event type from the options below:
- No Space on Disk : When an HDD is full.
- Disk Error : If the HDD is not detected properly.
- Video Loss : If a camera is not connected properly.
Switch:
Click and select ON to enable monitoring for the event, or select OFF to not monitor
for the event.
Buzzer: Click set the buzzer duration when the event occurs (10 s / 20 s / 40 s / 60 s). To
disable the buzzer, select Disable.