15
2 Megapixel HDcctv Indoor/Outdoor IR Dome Cameras
SECTION 3: SOFTWARE SETUP
3.7 SPECIAL FUNCTION
•
SHADING DET
: Sets the shading calibration that the lens will perform. Only occurs when the entire screen is viewed in white
light.(OFF / ON)
•
SHADING
: Select Lens shading compensation. (OFF / ON)
•
DEFECT DET
: Compensates for bad pixels that my occur. Occurs when the whole screen is in full black or if there is bad
pixelation and it changes the THRS values until the screen is fixed. (OFF / ON)
•
DEFOG
: Carry out defog function: OFF / ON
—
LEVEL : adjust amount of fog on display screen: 0 ~ 10. NOTE: When DEFOG is On, ACE and WDR/BLC function can not
turn on.
•
SYSTEM
: Select NTSC or PAL. (NTSC / PAL)
•
HD FORMAT
: Select Digital output 1080P or 720P. (1080P / 720P)
•
PG
: Select Color pattern generator (OFF / ON)
•
CVBS
: Select Composite signal (OFF / ON)
•
COMM
: Set up the camera ID, baud rate, protocol
—
ID : Select the camera ID: 1 ~ 255
—
BAUD RATE : Select serial communication speed: 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 bps
—
PROTOCOL : Select operating protocol: PELCO-D / PELCO-P / UPDATE
•
DEFAULT
: All the settings will be restored to the factory default.
3.8 DISPLAY
