v1.01 TDC-HB 11-5-2009
page 2 of 4
OBSERVATOR
instruments
Quick Start Guide
OMC-045-II
4. Connect the OMC-045-II via the USB cable to your pc
-
Start
OMC-programmer
-
Configure Substation]
-
Read Configuration From Device
-
Use Direct communication
-
Communication protocol: ‘OMC-045 II / OMC-
410
-
Select Com-port: COM xx (usually the highest
number)
*
-
Read Configuration From Substation
-
Baudrate:
19200
-
‘OK’
Sensors:
Select the connected sensors, use
Advanced
to
change port numbers / baudrate etc.
Parameters:
Select which parameters you want to log
Input (Tag list):
Change tag names, log interval, alarm interval etc
Substation:
Set Substation name / System Id & Data send time
Delay (normally 0)
Data Output:
Select Outputs, use
Advanced
to set intervals
Modem (Email/FTP and TCP/IP through GPRS):
Set your provider details, ftp server or emails
settings.
NOTE: FTP and EMAIL require different
firmware!
Alarm Handling:
Set sms alarm numbers and sms service center
number.
Save configuration:
Save your configuration to Substation and File as
backup.
