blad 20 van 57
OBSERVATOR
Instruments
Technical User Manual
OMC-045-II
6.2 Working of the scheduler
6.2.1 Synchronization
The scheduler plans the tasks of the OMC-045-II,
with use of a real time clock. All tasks are
synchronized with this clock. If a task has to be
preformed every 10 seconds, the task will
preformed on 00, 10, 20, 40, 50 s of the clock.
Sync method
Interval
Sync on divide
number off
1
< 1 sec
N.A.
2
<= 60 sec
60 sec
3
> 1 min < 1 hour
60 min
4
> 1 hour
24 hour
6.2.2 Alarm
The system is controlled if it is in Alarm mode or not. If an Alarm setting is reached, the interval switches
from “Normal interval” to “Alarm interval”. When it switches to Alarm interval, all tasks are synchronized
with the new interval.
You can configure an alarm on all measured and calculated data.
