Manual | MET-LINK
Status: Final | Not confidential
Page 17 | 31
V20200225
8.2 Pair the sensor via Bluetooth
After having activated the Bluetooth on
your phone:
1. Turn on the MET-LINK interface by
pressing on the blue button. Make sure
that the blue LED indicator turns on.
2. Go to the Bluetooth settings, scan to find the new device. Select
the new sensor to pair and press pair.
3. Wait while pairing the sensor.
4.
Allow pairing by pressing “OK”.
5. The sensor is now shown as paired. You can now run the MET-
LINK application.
Note: Step 2 to 5 are to be completed only at the first time when you connect a new sensor.
Blue indicator is
flashing
