Manual | MET-LINK
Status: Final | Not confidential
Page 15 | 31
V20200225
7.2 Charging the battery
1. Connect the provided charging adapter to the MET-LINK interface module and apply power.
2. At any time, you can monitor the charging status of the module by pressing on the MET-LINK
interface button. The LED indicator is flashing blue, green and red to indicate that the battery is
charging.
3. We highly recommend to use the application to monitor the battery level, please refer to
section
Read the Bluetooth battery level
” in the
chapter 8:
4. When the battery is fully charged, disconnect the charging cable.
Note: The best way to verify if the battery is fully charged is to use the Android application to monitor
the battery level. The user should expect that the charge will take ninety minutes and up to three
hours of charging if the battery is fully flat.
