38 | DE
OBO Bettermann
Installing the isCon® system
6. Insert the bottom part of the air-termination rod into the central mast
and fix with the side screw (20 Nm).
Fig 33:
20 Nm
Connecting the insulated central rod and the retaining rod
7. Tighten the screws at the connection point of the central rod and the
retaining rod (20 Nm).
Fig 34:
Sticking on the identification plate
Only for isCon ASE IN 23 connection element:
8. Stick the identification plate to the air-termination rod.
Next steps:
– “7.5 Fastening the air-termination rod in the tripod stand” on page
42 or “7.6 Fastening the air-termination rod to pipes, a wall or T
support” on page 46
– “7.7 Routing the isCon® conductor” on page 47
– “7.8 Attaching the potential connection” on page 48
