OBO Bettermann isCon 750 LGR, Инструкции системы

Страница: 9 / 68

System instructions OBO isCon
®
EN | 9
Product description
The isCon cable is sold by the metre and in two variants:
– isCon 750 SW with black jacketing
– isCon 750 LGR with additional external light grey protective jacket.
The light grey isCon cable is also suitable for routing in the earth. It can
also be painted, e.g. with the paint of the facade. As the external light
grey protective jacket is non-conductive, it must be removed in the contact
areas.
35 mm²
Ø 23 mm
Ø 26 mm
isCon 750 LGR
1
2
3
6
5
4
Figure 1: Schematic diagram of the isCon cables (black and light grey)
Legend:
1
Round cable, multi-wire, 35 mm
2
, Cu
2
Inner conductive layer (VPE)
3
Insulation (VPE)
4
Outer conductive layer (VPE)
5
External jacket with low conductivity (EVA)
6
External jacket, light grey (only for isCon 750 LGR)
Type isCon 750 SW isCon 750 LGR
Colour Black Light grey
Equivalent separation distance, air ≤ 750 mm ≤ 750 mm
Equivalent separation distance, solid materials ≤ 1500 mm ≤ 1500 mm
Equivalent separation distance, mixed materials See DIN EN 62305-3 Insert 1
External diameter 23 mm 26 mm
Round cable, multi-wire, Cu 35 mm
2
35 mm
2
Cable weight approx. 649 kg/km approx. 868 kg/km
Temperature range for routing min. -5 °C, max. 40 °C min. -5 °C, max. 40 °C
Operating temperature max. 70 °C max. 70 °C
Bend radius (min. 15 x D) min. 345 mm min. 390 mm
Tensile strength 1 750 N 1 750 N
Routing in the earth No Yes
Can be painted No Yes
Weathering resistance Ozone resistant according to DIN EN 60811-2-1 Section 8
Sunlight Resistance Test according to UL 1581 Section 1200
Coldness impact resistance according to-DIN EN 60811-1-4
Section 8.5
Tab 1: Technical data of the isCon cables 750 SW and 750 LGR