OBO Bettermann GES9-3B, Инструкция по монтажу

Страница: 21 / 37

GES9-3 plastic service unit EN | 21
Disposal
• Push in the BA10 spacers to stabilise the pressure plate
into the recesses on both sides (see Fig. ,
2
und
,
2
).
4.2.5 Mounting the hinged lid
If necessary, the hinged lid can be inserted turned through 180° during moun-
ting. The cable routing clip must then also be turned.
• Insert the hinged lid in the short link (see Fig. ,
1
).
• Swivel the hinged lid into the long link
3
.
• If necessary, pull out the cable routing clip
2
and push it to the other side.
5 Disposal
– Residual metal: As scrap metal
– Plastic: As household waste
– Packaging: As household waste
Comply with the local waste disposal regulations.