Objet Geometries Ltd Eden330\333 User Manual
4 - 9
1.2.5 Replacing the External Waste Container
The waste container contains partially cured polymeric material generated during
printing heads maintenance, and should be considered according to the safety
requirements as described in the User Manual.
The waste container has been designed for a long period of time, and might keep
up to 3 months of non-stop working. The user is requested therefore to observe
for a full container, and replace it accordingly, during the daily maintenance.
To replace and load the waste container, follow the next steps:
1. Open the Eden330/333 front left door.
2. Gently, pull out the external waste container. Treat it content as
polymeric material. Be aware of the pipe entering the container.
3. Lift up the container or shake it in order to feel if the container is full.
4. You may empty out the external waste container even if it has not
reached maximum level – Note to treat it content as polymeric
material.
5. While done, insert a new container by driving it back underneath the
cabinet.
.
Created by Neevia Personal Converter trial version
http://www.neevia.com
