6
English
Correct Use of the Fan
Preparation Before Use
Put the main unit on a stable level place
1.
Hold the handle to pick up and move the main unit.
•
Make sure that there is no foreign object in the place where the main unit base is located.
•
Install adapter
2.
Install the battery into the remote control
3.
1
Remote control (rear side)
Battery case
1
Turn over the remote control and pull out the battery case.
2
3
2
Insert the coin lithium battery into the battery case.
Pay attention to the polarity of the battery Insert the coin lithium battery into the battery
case.
3
Re-Insert the battery case into the main unit of the remote control until you hear a click
sound.
Attention
Remove the battery when it is not used for a long time.
•
When liquid leakage occurs, clean it completely before inserting a new
•
battery.
4
Remote control storage position
4
When the remote control is not in use, mount it on the remote control storage location in
the base of the main unit It will snap into place via a magnet.
Range
About 15 feet in front of the main unit.
•
About 30° to the left and right sides in front of the main unit.
•
If there is an obstacle between the remote control and the main unit, the remote control
•
may not work properly.
WARNING
Do not place the remote control in chest pocket if you are using a cardiac
pacemaker.
Insert the AC adapter into the outlet
4.
When it is properly connected to DC jack, the main unit will make a buzzing sound.
1920̲01a̲F3̲FKLT-251D̲Eng.indd 6
1920̲01a̲F3̲FKLT-251D̲Eng.indd 6
2019/04/10 10:12:23
2019/04/10 10:12:23