20
English
Before Requesting Repair or Service
WARNING
Only qualified technicians should disassemble or repair the fan.
Problem
Cause
Solution
No power.
DC plug or AC adapter
not connected properly.
Insert the DC plug of AC adapter
into the DC jack.
Insert the AC adapter into the
outlet.
Blades won’t turn.
The blades are not
•
properly installed
The blades are stuck
•
by the grille
Install blades and grilles properly
(refer to “Assembly Method of
Blades and Front Grille” on page
18)
Air volume pointer
and indicator are off
or have no display.
In light off mode.
The dimmer/light off mode can be
canceled by simply holding down
any button other than the
power button on the main unit or
the remote control.
Display part/
indicators are dark.
The dimmer mode will
be enabled automatically
in about one minute
after the last operation.
The dimmer/light off mode can be
canceled by simply holding down
any button other than the
power button on the main unit or
the remote control.
Unit stops running
suddenly.
Auto-off function is
enabled to turn off the
power automatically
(page 10)
Simply press any operation button
on the main unit or the remote
control to turn on the power.
Noise.
The blades are not
•
properly installed.
The blades are stuck
•
by the grille.
The front grille is not
•
properly installed.
Install blades and grilles properly
(refer to “Assembly Method of
Blades and Front Grille” on page
18)
Blade mounting knob is
loose.
Tighten the blade mounting knob
(refer to “Assembly Method of
Blades and Front Grille” on page
18)
The installation place
•
isn’t stable.
The noise is caused by
•
increased shaking in
an unstable place or
high position.
Set it in a stable place.
•
1920̲01a̲F3̲FKLT-251D̲Eng.indd 20
1920̲01a̲F3̲FKLT-251D̲Eng.indd 20
2019/04/10 10:12:27
2019/04/10 10:12:27