20
• The device may not be operated out-
doors.
• The device may never be operated with-
out supervision.
• Never put objects through the ventilation
grate into the device. Mortal danger!
• Never subject the device to water or other
liquids.
• The device may neither be operated in
rooms with a bathtub, shower or swim-
ming pool nor near washbasins or water
connections.
• The device may not be covered. There is
danger of fire.
• Do not use adapters or extension cords.
• Do not use the heater in conjunction with
a timer or any other switch capable of
automatic activation, as this creates a fire
hazard.
• Symbols appearing on your device may
not be removed or covered. Signs on the
device that are no longer legible must be
replaced immediately.
Your device at a glance
1. Heating control lamp
2. Heating power switch
3. Temperature regulator
Operation
Check before switching on!
Check the safe condition of the device.
– Check whether there are any visible
defects.
– Check whether all parts of the device are
firmly attached.
– Check whether the switch is on [0] before
you insert the plug into the outlet.
Switching on
– Set the temperature regulator (3) to "+"
and the heat output switch (2) to "Fan".
The product gives out cold air.
Pivoting the airstream automatically
– Press switch (4). The product swivels
within a range of 75°.
Temperature regulation
– Set the rotary switch to a position
between the left and right stops.
• Rotary switch to the left: lower room tem-
perature
• Rotary switch to the right: higher room
temperature
– To switch on the blower, turn the rotary
switch to the right until you hear an audi-
ble "click."
The device is equipped with automatic room
temperature detection; that is, it only
switches itself on when there is a need for
heat depending on the room temperature.
When it switches on, the heat control
lamp (1) lights up. When the desired temper-
ature has been reached, the blower shuts off
automatically and the control lamp (1) goes
out. To increase the room temperature, turn
the rotary regulator further to the right.
Read and observe the instructions
for use before using the product for
the first time.
To prevent overheating, do not cov-
er the heater!
DANGER!
Risk of injury!
The device must only be put into
operation if no faults are found during
the check-up. If any part of the
device is defective, it must be
replaced before the next use.
GB
Heizluefter_477091.book Seite 20 Mittwoch, 12. Juni 2013 2:05 14
Содержание 477091
Страница 2: ...2 1 4 3 2 1 Heizluefter_477091 book Seite 2 Mittwoch 12 Juni 2013 2 05 14 ...
Страница 69: ...69 Heizluefter_477091 book Seite 69 Mittwoch 12 Juni 2013 2 05 14 ...
Страница 70: ...70 Heizluefter_477091 book Seite 70 Mittwoch 12 Juni 2013 2 05 14 ...
Страница 71: ...71 Heizluefter_477091 book Seite 71 Mittwoch 12 Juni 2013 2 05 14 ...