OBH Nordica white satin, Инструкция по эксплуатации

Страница: 28 / 36

28
The floor brush
The floor brush can be used for cleaning carpets as well as hard floors. It has two positions:
Position 1 (the brushes are raised) Use when vacuum cleaning carpets. Indicated by the symbol without
brushes on the floor brush.
Position 2 (the brushes are lowered) Use when vacuum cleaning hard floors such as parquet, tiles, etc.
Indicated by the symbol with brushes on the floor brush.
Select position by pressing the foot pedal with the required symbol.
Additional accessories
The vacuum cleaner is equipped with additional nozzles. These accessories are stored in the accessory
compartment in the vacuum cleaner.
A
B
A) Upholstery and dusting brush nozzle
B) Crevice nozzle
Upholstery nozzle
This nozzle is used for vacuum cleaning upholstered furniture, cushions, curtains, etc. The upholstery
nozzle is part of the dusting brush nozzle. When you wish to use the upholstery nozzle the brushes are
detached. This is done by pulling the brush section forwards. When you wish to use the dusting brush
nozzle, push the brush section back on until it clicks.
Dusting brush nozzle
This nozzle is used for vacuum cleaning shelves, books, panels, etc. The nozzle must be attached to the
upholstery nozzle before vacuum cleaning as described above.
Crevice nozzle
This nozzle is used for vacuum cleaning crevices, corners, etc.
Cord reel
The vacuum cleaner is equipped with a practical cord reel function making it easy to unwind the cord to
the required length.
The cord is unwound by pulling the plug until the required cord length is obtained (approximately 8
meters maximum). The cord is fitted with a yellow marker indicating the ideal unwound cord length. The
plug is applied to a power socket (remember to switch it on).
Important!
The cord may NOT be unwound further than the red marker on the cord. Avoid damage to the cord
reel function – do not ever pull a fully unwound cord.
To rewind the cord press the foot pedal (G), and the cord is automatically reeled into the vacuum cleaner.
It is recommended that you hold back the cord slightly during rewind to prevent the plug from rebounding
onto the vacuum cleaner, thus protecting the cord reel and plug.
How to use the vacuum cleaner
Before the vacuum cleaner is used for the first time, make sure that the dustbag is placed correctly (see
how in the section ‘How to replace the dustbag’).