OBH Nordica Type 6243, Инструкция по эксплуатации, Страница: 11 / 16

11
OBH Nordica Personal scale
Before use
Before the personal scale is taken into use for the first time, please read this instruction manual
thoroughly and keep it for future use.
Please note that all electronic equipment are sensitive, including electronic scales. This means
that various conditions may influence weighing, e.g. temperature swings and moving the around.
Inaccuracies may occur if the scale is cold. The scale consequently functions most accurately at normal
room temperature. It is important that the scale is allowed to ‘acclimatize’ for 24 hours before it is used
for the first time. Electronic noise from other units such as mobile phones, small transmitters, and
certain microwave ovens may influence weighing.
Important
Put the enclosed batteries in the battery compartment underneath the scale. Wait until the scale shows
“0.0kg”. Set the scale for kg, British pounds (lb) or stones (st) by pressing the round button located
underneath the scale marked UNIT, until the display shows requested unit. The scale is now activated
and set.
The scale must be reset before it is used for the first time, or if it has been moved. If the scale is not reset
according to the instructions above, weighing errors will almost definitely occur.
The scale has a maximum tolerance of approximately 1%, i.e. if a person weighs 70 kg the displayed
weight may fall between 60.3 and 70.7. E.g. if you weigh 70.75 kg, the scale will read either 70.7 or
70.8 kg (with 1% tolerance).
Tips before weighing
It is important to stand completely still during weighing as even the slightest body movements may
cause considerable deviations from the actual weight. Also keep in mind that the scale is influenced by
the clothes you wear, if you wear shoes, if you have just finished a meal, etc. If you wish to keep an eye
on your weight over a longer period of time, weighing should be performed under comparable conditions
every day, preferably without clothes and without moving the scale around between weighings.
How to use the scale - important
1.
Place the scale on a plain, firm surface.
2. Reset the scale if this has not already been done. See above instructions.
3. Let the scale switch off automatically (the display turns off).
4. Step onto the scale (stand with your feet in the same place each time). Your weight should be
equally distributed between both feet and with equal weight on the heel and the front of the foot.
Remember to stand completely still! The weight can now be read from the display.
5. The scale always switches off automatically approximately 10 seconds after weighing, ensuring a
long battery lifetime.
If the scale is overloaded (180 kg maximum), ” ¯ ¯ ¯ ¯ ” will appear in the display.
Battery
The scale is delivered with 4 pcs AAA batteries that should be installed before you use the scale. Open
and remove the battery compartment lid underneath the scale. Place the batteries in the compartment
and put the lid back in place. When batteries needs to be replaced ”Lo” will appear in the display.
Cleaning and maintenance
The scale may not be immersed in water or placed near strong heat sources. The surface can be wiped
clean using a cloth moistened with water and a mild detergent. Wipe dry with a soft dry cloth or paper
towel. Never use strong, abrasive cleaners which may scratch the scale.
6243_AEL_0410.indd 11 2010-04-26 15:52:14