62
NOTE! Always position the iron on its heel when not in use!
When the iron has cooled down, the cord can easily be wrapped
around the heel of the iron and kept in place by the clip on the
cord.
Self-cleaning - cleaning of the steam chamber of the iron
You will get the best result and the iron will last longer if the
self-cleaning process is followed at regular intervals, i.e. once
or twice a month. By doing this possible limestone and fluff in
the steam chamber and in the steam holes will be removed.
Unplug from the wall outlet.
•
Set the steam selector at position (closed).
•
Fill the water tank to the MAX marking.
•
Position the iron vertically on its heel.
•
Turn the temperature indicator to MAX and plug the
appliance.
•
Let the steam iron heat and wait until the signal lamp goes
out.
•
Unplug from the wall outlet and hold the iron horizontally
over a sink.
•
Push the steam selector forward until the symbol
is visible
and keep the selector in that position during the entire
procedure. The button may be a little slow, but this does not
mean that the iron is defective.
•
Steam and boiling water will now evaporate from the holes
of the soleplate. Impurities and limestone will be flushed out.
Move the iron forwards and backwards over the sink while
steam and boiling water evaporate from the soleplate. Continue
until the water tank is empty. After descaling, release the self-
cleaning button. Let the soleplate cool off and wipe it with a
cloth.
2107_IDV_1112.indd 62
2013-03-25 15:10:56
Содержание Touring 450i GT
