59
Make a test on an old cloth or fabric to make sure that all
possible impurities in the water tank have been removed. Some
parts of the iron have been slightly lubricated/greased, which
may create some smoke when you use the iron for the first
time. After about 10 minutes the smoke (which is completely
harmless) will disappear.
When steam ironing at low temperatures some dripping may
be seen from the soleplate, as the water in the tank will not
evaporate sufficiently fast. Consequently, make sure to set the
steam selector corresponding to the temperature setting.
Before you start ironing, press the spray and steam
selector 3-4 times to activate these functions.
Burst of steam
Make sure that the water tank is filled by at least ¼. Set the
temperature indicator at the wanted position between ••• and
MAX and wait until the signal lamp goes out.
Lift the iron a few centimetres from the garment and press hard
on the burst of steam button. The soleplate will now release a
powerful burst of steam onto the garment. It may be necessary
to activate the burst of steam button a couple of times in order
to ensure the optimum power of the pump in the iron. Wait at
least 4 seconds between each pressing.
Note that the burst of steam can only be activated at high
temperatures and when the steam selector is set at ”3”. If you
want to have a more powerful burst of steam, set the steam
button at position .
IMPORTANT!
If you use the steam function it is important to keep
children away due to the risk of burns. Keep your fingers
off the jet of steam when this function is on.
2107_IDV_1112.indd 59
2013-03-25 15:10:56
Содержание Touring 450i GT
