28
Mounting of CO2 cylinder
1)
Position the SodaMaster machine front face down on a plane and soft surface (to avoid
scratches)
2) Remove the sealing and the lid of the CO2 cylinder (save the lid for remounting in case
of exchange or return of the CO2 cylinder)
3) Demount the rear shield by pressing the bottom button and lifting upwards from the bottom
4) Now draw the rear shield upwards and disengage it completely from the machine.
5) Insert the CO2 cylinder through the opening at the bottom. Turn the thread of the CO2
cylinder clockwise (seen from the bottom) in the valve thread at the top of the machine.
6) Make sure that the CO2 cylinder is completely tightened (never use unnecessary force,
which might damage the machine).
7) Mount the rear shield (see fi gure below). Start by inserting the top part of the rear shield
into the top of the machine (1), make sure that the ridge on the back shield (2) is situated
beneath the carbonation button and then click the rear shield into position (3)
6515-6518 IM.indd 28
6515-6518 IM.indd 28
12-03-2010 08:35:47
12-03-2010 08:35:47
Содержание SodaMaster Gazelle 6511
Страница 33: ...6515 6518 IM indd 33 6515 6518 IM indd 33 12 03 2010 08 35 50 12 03 2010 08 35 50 ...
Страница 34: ...6515 6518 IM indd 34 6515 6518 IM indd 34 12 03 2010 08 35 50 12 03 2010 08 35 50 ...
Страница 35: ...6515 6518 IM indd 35 6515 6518 IM indd 35 12 03 2010 08 35 50 12 03 2010 08 35 50 ...