OBH Nordica Miami, Инструкция по безопасности и руководство пользователя, Страница: 29 / 34

Parts of the appliance
(see fig. page 3)
1. Feeding lid
2. Lid
3. Glass jug
4. Knife part
5. Rubber gasket
6. Locking ring
7. Jug holder
8. Motor part
9. Control panel
10. Speed selector
Use
The blender is used for blending, chopping, pureeing and mixing e.g. milk
shakes, baby food, soups and sauces. Furthermore you can crush ice for drinks
etc.
Put the glass carafe on the motor part by inserting the jug into the grooves of
the motor part and turn it clockwise until it engages with a click. Test that the
carafe is properly positioned. Note that you can not activate the appliance if the
jug is not positioned correctly on the motor part.
The motor of the mixer runs the knife blades at high speed in order to ensure a
thorough mixing. Consequently, it is important that the blender is always placed
on a plain, dry surface before it is activated.
To avoid overfilling the jug, the amount must not exceed 1 litres. Use the
measurement scale on the container as a guide. Place lid and stopper on the
jug before you switch on the blender.
Make sure that the blender is set at speed level ‘0’ and apply the plug to a wall
outlet. Turn the switch to the desired speed level for a few seconds. Then turn
the speed switch back to ‘0’ and check the texture of the mixture. Continue
mixing if necessary.
The blender has the following speed levels/functions:
0 The appliance is switched off.
1 You can use speed level 1 if you want to mix powder for e.g.
porridge, sauces etc.
2 Speed level 2 is perfect for chopping e.g. for preparing baby food.
P (pulse) Use the pulse level (P) for short intervals and for crushing of ice.
The speed selector should be kept in the pulse level in order that
the blender can work. As soon as the speed selector is released,
the blender will stop.
29
7753_7754_7755_7756_CS_UVN_0115.indd 29 2015-03-25 14:11:10