29
Lime filter
The water boiler is equipped with a lime filter. Remove the filter for cleaning as
follows: open the lid of the water boiler and pull out the filter. Wash the filter
with a washing-up brush and put it in a decalcifier for a few minutes. Next, put
back on the filter.
Descaling and cleaning
Clean the kettle at regular intervals for scale and be aware of the following:
• Only boil the necessary amount of water – to save current. Empty the kettle
after each use. This will reduce the amount of scale, and coffee and tee,
brewed on fresh water, have a better taste.
• Check the status of scale often. If there is scale in the kettle, use one of
the ordinary descaling means – such as e.g. citric acid. Do not use ordinary
household vinegar for descaling of the kettle. It is extremely important
to carefully follow the instructions of the product and that the product is
poured out after the duration of action and that the water used for the first
couple of boiling after descaling is not used.
• If there is still a lot of scale left on the heating unit, descale the kettle again
and make sure to descale regularly in the future.
• The descaling process is accelerated by heating the liquid to about 50-
60°C.
IMPORTANT! NEVER USE SHARP ITEMS TO REMOVE LIMESTONE,
AS THESE MAY DAMAGE THE APPLIANCE AND MAKE THE WATER
BOILER UNUSABLE. IF THE APPLIANCE IS NOT DESCALED AT
REGULAR INTERVALS, THE APPLIANCE MAY BECOME UNUSABLE.
SUCH DAMAGE IS NOT COVERED BY THE WARRANTY.
The housing of the water boiler can be cleaned with a damp cloth and wiped
dry. Do not use scouring or etching detergents. Neither the appliance nor the
contact plate are dishwasher-proof.
Disposal of the appliance
Legislation requires that all electrical and electronic equipment shall be
collected for reuse and recycling. Electrical and electronic equipment
marked with the symbol indicating separate collection of such
equipment must be returned to a municipal waste collection point.
OBH Nordica LIMITED GUARANTEE
The Guarantee
OBH Nordica guarantees this product against any manufacturing defect in
materials or workmanship during 2 years within Sweden, Norway, Denmark and
Finland, starting from the initial date of purchase or delivery date.
This manufacturer’s commercial guarantee covers all costs related to restoring
the proven defective product so that it conforms to its original specifications,
6420_KK_UVN_0315.indd 29
2017-06-02 10:55:12
