25
Always hold the handle on the rubber
area for both the upper and lower side
of the handles since the surface gets
hot during use. See the illustration to the
left. Hold the appliance by the handle on
a safe distance from the skin and eyes.
Use a mirror.
Take a hair section of appr. 5 cm. Spread the hair section between the plates
and close the appliance. Draw the appliance from the roots through to the tips
of your hair. Never hold the appliance still. For best result start at the roots and
work your way to the tips. If you need to repeat the same hair section, overlap
by placing the plates on the already styled hair.
Keep the heated parts away from scalp, face, neck and hands. Never use the
appliance on wigs and artificial hair without testing on a thin hair section first,
otherwise the wig/artificial hair may melt.
Note!
This straightener reaches very high temperatures. The appliance should
be drawn from the roots to the tips in a smooth movement and should not be
hold still since the hair can get burnt.
Shut off the appliance after use by pushing the switch to 0 and pull the plug.
Always let the straightener cool before you put it in a bag or similar.
Cleaning and maintenance
• Turn off the appliance by pushing the switch to 0. Unplug the appliance and
let the appliance cool completely on the enclosed heat resistant mat before
cleaning. Make sure that the appliance is out of reach for children. The
appliance gets very hot during use and it will take time for it too cool down.
• Never immerse the appliance or cord in water or other liquids. It must never
come in direct contact with water.
• Do not let water escape under the cover.
• Dry the appliance cover and appliance with a damp cloth. Wipe with a dry
cloth.
• If the appliance is dirty, clean the surface with a damp cloth and wipe with a
dry after.
• Don´t wind the cord around the appliance.
• Make sure that the appliance has cooled completely before storage.
• Store the appliance on a dry safe place away from children after use.
Disposal of the appliance
Legislation requires that all electrical and electronic equipment must be
collected for reuse and recycling. Electrical and electronic equipment
marked with the symbol indicating separate collection of such
equipment must be returned to a municipal waste collection point.
Содержание Bjorn Axen Mini 3058
Страница 1: ......
Страница 28: ...SE EE 3058 311018 ...