OBH Nordica ATTRAXION Lift&Wash, Руководство пользователя

Страница: 35 / 40

Long comb:
Step 1 = 23 mm
Step 2 = 26 mm
Step 3 = 29 mm
Step 4 = 32 mm
Step 5 = 35 mm
Step 6 = 38 mm
Step 7 = 41 mm
We recommend that you start with the longest comb the first time to prevent
cutting off too much.
• Mount the comb onto the hair cutter by inserting the
grooves of the comb into the rails on the hair clipper
and press the comb downwards until it engages. At a
later stage you can reposition the comb by pressing the
adjustment button on the comb (see fig.) and at the same
time press the comb upwards or downwards. The hair
clipper can also be used without the distance comb if
you want a shaved result (see further under “Use without
distance comb”).
• If you just want to thin the hair, push the button (2) on the
thinning comb upwards. Now the thinning comb will be in
front of the trimming head.
• Next, switch on the hair clipper by pushing the switch upwards. Hold the
appliance with the trimming head upwards to have the flat side of the
trimmer facing towards the head. Start at the neck and move the hair clipper
in short, soft movements upwards and outwards. Work your way up to the
top of the head and continue with the next section. Take your time and
stop and check the result from time to time and comb the hair regularly to
remove loose hair.
• If the hair clipper starts to work slower, check for hair sticking in the comb/
trimmer head. Switch off the appliance and remove all hair before you start
again. The problem may even be due to the fact that the battery needs
charging, if the appliance no longer works. If the battery has not been
sufficiently charged, the hair cutting could still be made by connecting the
switch of the adapter to the net coupling of the hair clipper.
• For trimming around the ears and lower neck you might need to change to a
shorter comb or remove the comb and use the trimming head only.
34
35