20
in the meat grinding compartment. Next, mount the holder
of the biscuit disk on the separator and be careful that the
notch is positioned opposite the corresponding groove on
the separator. Finally, assemble the set by screwing the
assembly ring at the end of the meat grinder compartment
and fix the disk with the biscuit tins on the holder.
Always check that the kitchen machine is not plugged during
mounting or demounting of the meat grinder.
Mount the meat grinder on the kitchen machine by first
removing the cover of the joint part of the meat grinder by
pulling the cover upwards in the direction of the arrow and
turn the meat grinder counter-clockwise until it engages.
Mount the meat tray on the feed hopper. Plug the kitchen
machine, and the meat grinder with the biscuit accessories
is ready for use.
We recommend that you always start at the lowest speed
and gradually increase the speed to the wanted one
between 1 and 6.
After use, switch off the machine and unplug from the mains
supply.
Remove the meat grinder from the kitchen machine by
pressing the release button at the left side of the meat grinder
and turn, at the same time, the meat grinder clockwise. Put
the cover back in place by pressing the button at the left side
of the joint part of the meat grinder and pressing the cover
back in place at the same time. Demount the assembly ring
by unscrewing it from the meat grinder compartment and
remove the accessory.
Overheating
The kitchen machine is equipped with a thermostat that
ensures a long lifetime of the appliance and which will be
activated if the motor is overcharged. If the thermostat is
activated, switch off the appliance and unplug from the mains
supply and wait for about 20 minutes before restarting the
appliance
7604_IM_010711.indd 20
01-07-2011 10:41:20
