Use of shaving attachment
Make sure that the switch is in off position. Remove the protective cap and remove the
epilator head by pressing the release button on the front of the unit and at the same time lift
the epilator head. Attach the shaving head with the protective cap on and press until it clicks
into place. The shaving head can not click if it´s placed the wrong way.
Remove the protective cap and it´s ready to use.
Important! The shaving head should
only be used at high speed (2). Hold the unit at a slight angle and move it towards the
direction of the hair so that the foil trap the hair and smooth away any stubble.
Cleaning and maintenance - after each use
Clean the appliance after use. Make sure that the epilator is shut off and unplugged. The
main unit can be cleaned with a damp cloth and some mild detergent. Regular cleaning
prolong the efficiency and life of the appliance.
Cleaning of epilator head
Remove the epilator head by pushing the release button on the front and lift upwards. Lift the
epilator discs by squeezing both sides of the cover and lifting up the discs. Use the brush to
remove hair on all sides of the discs. Replace the discs by gently pressing until it clicks into
place into the cover. Place the epilator head back onto the unit until it clicks into it´s place by
lining up the teethed wheel on the body and the epilator head. Put the protective cap back.
To remove residue from the tweezers, use rubbing alcohol on the brush. Make sure the
brush is not soaked in alcohol.
Cleaning of shaving head
Remove the shaving head from the unit by pressing the release button on the front of
the unit. Remove foil and trimmer unit from the shaving head by carefully lifting under the
trimmer. Clean with the brush and gently shake the foil- and trimmer assembly to remove
hair accumulated inside the assembly. Replace the foil- and trimmer unit onto the shaving
head by pressing until it clicks into place. Place the shaving head on the main unit and put
on the protective cap.
Important!
Persons with sensitive skin can easily get irritated skin after epilation. You should
•
therefore try the epilator/shaving head on a small area on your leg or arm before you
use the appliance.
Do not use products that contains alcohol before or immediately after use of the epilator/
•
shaving head.
The foil is very thin, do therefore avoid to press it hard and do not drop the appliance.
•
If you press the appliance too hard towards the skin during use this may cause irritated
•
skin.
Do not use the appliance in your face, on sunburned skin or irritated skin.
•
Do not sunbathe immediately after epilation.
•
We recommend that you use lotion after epilation/shaving.
•
Safety instructions
1. Read the instruction manual carefully before use, and save it for future use.
2. Plug the adapter to a household outlet of 230V only, and use the appliance only for the
intended use.
20
5556_AE_0809.indd 20
2009-08-18 10:59:44
