OBH Nordica 2255, Инструкция по использованию

Страница: 32 / 36

Bread crumbs are collected in the crumb tray at the bottom of the toaster. Pull
out the crumb tray and clean it with e.g. a brush or similar before putting it back
in the toaster. Clean the casing with a damp cloth and wipe with a completely
dry cloth. Never use scratching detergents, as such products may damage the
surface of the appliance.
Disposal of the appliance
Legislation requires that all electrical and electronic equipment shall be
collected for reuse and recycling. Electrical and electronic equipment
marked with the symbol indicating separate collection of such equipment
must be returned to a municipal waste collection point.
OBH Nordica LIMITED GUARANTEE
The Guarantee
OBH Nordica guarantees this product against any manufacturing defect in
materials or workmanship during 2 years within Sweden, Norway, Denmark and
Finland, starting from the initial date of purchase or delivery date.
This manufacturer’s commercial guarantee covers all costs related to restoring
the proven defective product so that it conforms to its original specifications,
through the repair or replacement of any defective part and the necessary la-
bour. At OBH Nordicas choice, a replacement product may be provided instead
of repairing a defective product. OBH Nordicas sole obligation and your exclu-
sive resolution under this guarantee are limited to such repair or replacement.
Conditions & Exclusions
OBH Nordica shall not be obliged to repair or replace any product which is not
accompanied by a valid proof of purchase. The defective product may be retur-
ned to the store of purchase.
This guarantee applies only for products purchased and used for domestic
purposes and will not cover any damage which occurs as a result of misuse,
negligence, failure to follow OBH Nordica instructions, or a modification or
unauthorised repair of the product, faulty packaging by the owner or mishand-
ling by any carrier. It also does not cover normal wear and tear, maintenance or
replacement of consumable parts, or the following:
- using the wrong type of water or consumable
- mechanical damages, overloading
- damages or poor results specifically due to wrong voltage or frequency as
stamped on the product ID or specification
- ingress of water, dust or insects into the product
- scaling (any de-scaling must be carried out according to the instructions for
use)
32
33