58 Chapter 3: Page 2 Parameters
Oberheim
37 . Portamento Quantz:
When this parameter is set to ON, all porta-
mento modes are quantized to semitones.
38 . Portamento Legato:
Only operational while in Unison mode, this
parameter causes portamento to only be on when playing legato from one
note to another.
39 . Chord Key Limit:
This parameter limits the range of the keyboard
that held chords can be played on. This means un-held notes can be
played on the range of the keyboard that is outside the Key Limit, along-
side held chords. The range of the Hold/Chord feature can also be set by
holding the
chord
switch and pressing a key on the keyboard.
40 . Chord Hold Mode:
This parameter sets the behavior of the
chord
switch. The default mode is “Key Only” in which the held chord is only
played when a key is played on the keyboard. If set to “Infinite” then the
held Chord will continue to sound even after the key is released.
41 . Bend Lever Amount:
Use this parameter to limit the range of the
Bend lever, from ¼ to 12 semitones. This parameter can also be set by
holding the AMOUNT switch in the Lever Box and pressing a key from
C0 to C1.
42 . Velocity
:
Off, Amp, Filter, Amp + Filter - Allows velocity from the
built-in keyboard or a connected keyboard controller to apply key veloc-
ity modulation to filter frequency, amp amount, or both.
43 . Velocity Amount:
0-127 - Sets the amount of key velocity applied to
the selections in the Velocity parameter.
44 . Aftertouch:
Off, Amp, Filter, Amp - As in the Velocity
setting, allows keyboard aftertouch to affect amp, filter, or amp + filter
parameters.
45 . Aftertouch Amount:
Sets the amount of key aftertouch applied to the
selected parameters in the Aftertouch setting.
Содержание OB-X8
Страница 1: ...USER S GUIDE www oberheim com ...
Страница 8: ...viii Oberheim ...