Oberheim OB-X8, Руководство пользователя

Страница: 19 / 137

10 Rear Panel Connections Oberheim
Saving a Program
If you’ve created a sound that you like, you’ll probably want to save it.
Saving a program overwrites a previously saved program. Sound design-
ers often save many incremental versions of a program as they continue
to refine it. These intermediate versions often make good jumping off
points for new sounds.
To save an edited program to the same preset location:
3. Press the
write
switch. Its LED begins blinking.
4. Press a
program
switch (1-8.)
5. The
write
button LED stops blinking and the program is saved into the
User sound set.
Be careful when
WrIte
is enabled. You can change
groups
and
banks
without
executing
WrIte
, but once you press a
program
switch (1-8), the
WrIte
command is
executed and the program at that location is overwritten.
To save a program to a different Group and/or Bank location:
1. Press the
write
button. Its LED begins blinking.
2. Turn the
bank
encoder to move through Banks to choose the desired
bank
location.
3. Turn the
group
encoder to choose one of the 16 Group locations.
4. Press a
program
switch (1-8) to specify the location of the program in
the Group. The
write
switch LED stops blinking and the program is
saved.
To rename a program:
1. Press the
write
switch. It begins flashing.
2. While the
write
LED is flashing, press the
page
2
switch
. The display
changes to the
edit name
screen.
3. Use the
scroll
knob to select a character then use the
value
knob to
change the character.
4. When you have finished, press the
page
2
switch
to exit the
edit name
screen.