15
INSTALLAZIONE, USO E MANUTENZIONE
INSTALLATION USE AND MAINTENANCE
will go below the pre-set level
WARNING
FOR ALL THE MODELS:
➢
The coffee grinder is equipped with a dose counter (E).
➢
The coffee grinder is equipped with a safety devise preventing the motor from
overheating. Should the safety device set in, wait for the system to cool down and
make sure that overheating is not caused by external sources.
➢
Grinding grade adjustment is to be performed while burrs are running.
FOR ATR PERFORMANCE E AND ATR MAXI PERFORMANCE E:
➢
The grinder is with a cooling fan managed by a temperature probe. When the
temperature inside the grinder reach 40° C the fan will start spinning. It will stop when
the temperature goes below 30°.
➢
The grinder is equipped with a protection timer. After 5 minutes of uninterrupted work
the timer will stop the motor and the grinder starts beeping. To restart the grinder
and to stop the beep turn off the main switch (
1
) then turn on the switch.
GROUND COFFEE ADJUSTING:
Block the dosing star (
D
) and turn clockwise the inner
knob (
C
) to reduce the ground coffee dose (5.5
–
9.0
gr).
Block the dosing star (
D
) and turn anti clockwise the
inner knob (
C
) to increse the ground coffee dose (5.5-
9.0 gr)
IMPORTANT: The manufacturer default setting per
dose is approx. 7g - 0,2469 oz of coffee
Clean the hopper on a weekly basis.
The only part to be replaced are burrs: check if they wore out and replace both at the
same time as described here below.
WARNING:
•
Before performing any maintenance operation, make sure that the coffee grinder is
D
MAINTENANCE
C
