EN
16
1
General information
Read these instructions before using the clippers for the first time. The
manufacturer/importer is released from all liability in the event of any use
not in conformity with the instructions.
1.1
Purpose of the manual
This manual provides detailed information about use of the professional cordless
finishing hair clippers, made by o’BARBER, model TO50. It is completed by advice
on safety and servicing, and it also gives the technical characteristics.
It must be kept in a safe place, so that it can easily be consulted and passed on to
any other persons likely to use the equipment, in particular in the event of resale.
1.2
Who is concerned by this manual?
This manual is provided for all persons wishing to use the clippers in a professional
context.
1.3
About the manual
Copyright
2016 by C.A.R. SAS
Document code: TO50-DOC – English version
Edition March 2016 – Version 0
All rights reserved. Reproduction of all or part of this document, in any form
whatsoever, is prohibited unless C.A.R. SAS has given its prior written approval
thereto.
Due to ongoing research and development, the specifications of this product may
be modified at any time without notice.
To the best of our knowledge, the information in this manual is accurate.
Photos not contractual.
1.4
Regulations
TO50 clippers are in compliance with the following standards:
EMC directive 2014/30/EU
Electromagnetic compatibility
Directive 2014/35/EU
Low voltage
The label placed on the clippers (Fig. 2) attests its conformity with the above-
mentioned standards.