OBaby Minnie Circles, Инструкция по эксплуатации

Страница: 8 / 9

fig. 49 fig. 50
fig. 53 fig. 51 fig. 52
Optional-Fitting the Car Seat
fig. 48
Optional
Travel System
Press
fig. 54 fig. 55 fig. 56
Removing the Car Seat
Press
Lift
14 15
www.obaby.co.uk
www.obaby.co.uk
To install the car seat, clip the car seat adaptors onto either side of stroller frame as
shown (fig.48-50). Ensure the adaptor is aligned with the metal pegs and lock into
position by closing the mount fully (fig.49). Repeat this for both sides of the stroller.
Position the car seat over the car seat adaptors, taking care to align the car seat with
both adaptors (fig.51). Press down until you hear a click and the car seat is fully inserted
(fig.52-53).
You can adjust the car seat handle by pressing the grey button on both sides of the
handle, while rotating the handle.
To remove the car seat, slide the button on the adaptors on both sides of the car seat as
shown (fig.54-55) and lift the car seat up out of the adaptors.
Remove the car seat adaptors by lifting the flap on the adaptor (fig.56) and un-clip the
adaptor from the chassis. Repeat for both sides of the stroller.