Oasis OASIS Ci 10, Руководство по установке

Страница: 18 / 40

16
15
4.OPERATION AND USE 4.OPERATION AND USE
4-2 Timing silent function setting
Start time and end time setting value must be among the range of
and se ttin g v alue can be prec ise to hour digit.
0:00-23:00,
For example above, click "ON"to use timing silent,
the unit will start the silent at 0:00 points and end at 4:00;
click "OFF" to unuse the timing silent, but if the unit
is in timing silent mode, it will exit silent timing immediately.
Click timing silent button , and interface displays as follows: ②
Colur
Use:green
Unused:gray
Used: red
Unused:gray
Function
Click to use or unuse timing
on function
Click to use or unuse timing
off function
Click this button to set the timing
silent start time
Click this button to set the timing
silent end time
Timing silent on
Timing silent off
Timing silent start
t i m
e
Timing silent end
t i m
e
①
②
NO.
③
④
Name
①
③
④
②
(5) History of the fault
In the main interface click fault display key, interface displays as follows:
If no failure, main interface displays static " "
After troubleshooting, if you do not check the failure record,
the main interface will display static " "; if you check the
failurerecord, the main interface will displays static " ";
Failure record is in reverse order,according to the happening time.
Press the "Clean" key,you can delete the fault record.
When fault occurs,the fault icon will flash between the " " " ",
the failure interface will record time, code, name of the fault.
Fault time
day - month - year
hour:min
The fault name
Fault code