13
SECTION 3: MW8EBQ, MW12EBQ
Solenoid Valve
Out
Solenoid Valve
In
Not Included
Chiller Water in
Chiller Water Out
Provided Ball Valve
and 3/8” O.D. copper
to building water
supply
Insulated Tube
Connections to Filler
Fitting
Strainer Inside
A.
B.
C.
D.
E.
Attach cradle to frame per rough-in drawing. (Screws Provided - 4)
Place chiller in frame.
Install 1/4” union fittings on chiller inlet and outlet.
Connect water line from bottle filler solenoid valve out to chiller water in. Connect chiller
water out to bottle filler delivery fitting.
Note:
squeeze ends of tubes back to round shape
as needed after cutting.
IMPORTANT: Refer to Electrical Connections on page 12, step 4 for proper grounding
instructions.
STEP 1 : FILTER INSTALLATION (WITH CHILLER)