background image

STRUCTURAL CONCEPTS TECHNICAL SERVICE CONTACT INFORMATION & LIMITED WARRANTY 

SCC Warranty Revision L Date: 05/11/2022

 

LIMITED WARRANTY 

 

Overview:

 All sales by Structural Concepts Corporation (hereafter, 

SCC

”) 

are subject to the following limited warranty. 

Goods

” 

refers to the product or products being sold by SCC. 

 

Warranty Scope: 

Warranty is for equipment sold in the United States, Canada, Mexico and Puerto Rico.  Equipment sold elsewhere may carry modified warranties. 

 

Warranty; Remedies; Limitations:

 The limit of liability of SCC toward the exchange cost of the original compressor motor (and/or any other components) is one year parts and labor. If any 

Goods are found to be of faulty material or workmanship within one year of the original F.O.B. (free on board) unit shipment, SCC will, at its option (after inspection by an authorized                             

representative), replace or pay the reasonable cost of replacement of the faulty Goods. If warranty claim is not made within this one year time period, SCC is not bound to warrant Goods. A    

motor-compressor (and/or any other components) replaced during the warranty shall not exceed manufacturer's current established wholesaler

s exchange price. If replacement motor-compressor 

(and/or other components) is available via storage facility, parts truck, etc., SCC mandates that readily accessible replacement components be used toward repair of Goods; in such instances, SCC 

will replace such equipment (at its own expense) after confirmation of its use/placement on defective unit. SCC shall not be charged an additional fee, up-charge or expense for such replacement 

Goods. If SCC is unable to repair or replace the defective Goods, SCC shall issue a credit to the Purchaser for full or partial purchase price, as SCC shall determine. The replacement or payment in 

the manner described above shall be the sole and exclusive remedy to Purchaser for a breach of this warranty. If any Goods are defective or fail to conform to this warranty, SCC will furnish 

instructions for their disposition. No Goods shall be returned to SCC without its prior consent.  

 

SCC

s liability for any defect in the Goods shall not exceed the purchase price of the Goods. SCC SHALL HAVE NO LIABILITY TO PURCHASER FOR CONSEQUENTIAL DAMAGES OF ANY 

KIND WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, PERSONAL INJURY, PROPERTY DAMAGE, LOST PROFITS, OR OTHER ECONOMIC INJURY DUE TO ANY DEFECT IN 

THE GOODS OR ANY BREACH OF SCC, SCC SHALL NOT BE LIABLE TO THE PURCHASER IN TORT FOR ANY NEGLIGENT DESIGN OR MANUFACTURE OF THE GOODS, OR FOR 

THE OMISSION OF ANY WARNING THEREFROM. 

 

SCC shall have no obligation or liability under this warranty for claims arising from any other party

s (including Purchaser

s) negligence or misuse of the Goods or environmental conditions. This warranty 

does not apply to any claim or damage arising for or cause by improper storage, handling, installation, maintenance, or from fire, flood, accidents,   structural defects, building settlement or movement, acts of 

God, or other causes beyond SCC

s control.  

 

Except as expressly stated herein, SCC makes no warranty, express, implied, statutory or otherwise as to any parts or goods not manufactured by SCC. SCC shall warrant such parts or Goods only (I) against 

such defects, (II) for such periods of time, and (III) with such remedies, as are expressly warranted by the manufacturer of such parts of Goods. Notwithstanding the foregoing, any warranty with respect to 

such parts of Goods and any remedies available as a result of a breach thereof shall be subject to all of the procedures, limitations, and exclusions set forth herein. 

 

THE WARRANTIES HEREIN ARE IN LIEU OF ALL WARRANTIES, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE. IN PARTICULAR, SCC MAKES NO WARRANTY OF                                 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 

 

No representative, agent or dealer of SCC has authority to modify, expand, or extend this Warranty, to waive any of the limitations or exclusions, or to make any different or additional warranties with respect 

to Goods.  

 

Period of Limitations:

 No claim, suit or other proceeding may be brought by Purchaser for any breach of the foregoing warranty or this Agreement by SCC or in any way arising out of this Agreement or 

relating to the Goods after one year from the date of the breach. In the interpretation of this limitation on action for a breach by SCC, it is expressly agreed that there are no warranties of future performance of 

the goods that would extend that period of limitation herein contained for bringing an action. 

 

Indemnifications:

 Purchaser agrees to indemnify, hold harmless, and defend SCC if so requested, from any and all liabilities, as defined herein, suffered, or incurred by SCC as a result of, or in connection 

with, any act, omission, or use of the Goods by Purchaser, its employees or customers, or any breach of this Agreement by Purchaser. Liabilities shall include all costs, claims, damages, judgments, and 

expenses (including reasonable attorney fees and costs). 

 

Remedies of SCC:

 SCC

s rights and remedies shall be cumulative and may be exercised from time to time. In a proceeding or action relating to the breach of this Agreement by Purchaser, Purchaser shall 

reimburse SCC for reasonable costs and attorney

s fees incurred by SCC. No waiver by SCC of any breach of Purchaser shall be effective unless in writing nor operate as a waiver of any other breach of the 

same term thereafter. SCC shall not lose any right because it has not exercised it in the past. 

 

Applicable Law. This Agreement is made in Michigan; it is governed by and interpreted according to Michigan law. Any lawsuit arising out of this Agreement or the Goods may be handled by a federal or 

state court whose district includes Muskegon County, Michigan, and Purchaser consents that such court shall have personal jurisdiction over Purchaser. 

 

LED Lighting Components Within Lighting System:

 Supermarket: 5-year LED warranty from date of shipment. Foodservice: 2-year LED warranty from date of shipment. After one year, warranty does 

not include labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing, or handling of either defective part or replacement parts. Remedy of repair or provision of a                 

replacement part without charge shall be the exclusive remedy for any warranty claim. The replacement LED and/or power supply assumes the unused portion of warranty remaining on unit(s). A 90-day 

warranty will apply for any LED sold as a service part. Warranty claim must include serial and model number of unit as well as date code on defective LED lighting component(s). Manufacturer may request 

return of defective part(s) at customer

s expense to initiate claim. 

 

Glass Material: 

Glass (UV-bonded glass, glass sneeze guards, glass enclosures, glass held in place via posts, etc.) is only warranted to FIRST POINT OF DELIVERY. 

 

Miscellaneous: 

If any provision of this Agreement is found to be invalid or unenforceable under any law, the provision shall be ineffective to that extent and for the duration of  the illegality, but the                    

remaining provisions shall be unaffected. Purchaser shall not assign any of its rights nor delegate any of these obligations under this Agreement without prior written consent of SCC. This Agreement shall be 

binding upon and inure to the benefit of SCC and Purchaser and each of their legal representatives, successors and assignees. 

SCC warrants its products to be free of defects in materials and workmanship under normal use and service for a period of one (1) year from the date of delivery. 

 

This warranty is extended only to the original purchaser for use of the Goods. It does not cover normal wear parts such as plastic tongs, tong holders, tong cables, bag holders,  or acrylic dividers.   

 

General Conditions: 

All service labor and/or parts charges are subject to approval by SCC. Contact Customer Service Dept. in writing, by phone, fax or email. 

 

All claims must contain the following information: (1) model & serial code number of equipment; (2) the date and place of installation; (3) the name and address of the agency which performed the                        

installation; (4) the date of the equipment failure; and (5) a complete description of the equipment failure and all circumstances relating to that failure.  

 

Once the claim has been determined to be a true warranty claim by SCC

s Customer Service Department, the following procedure will be taken: (1) replacement parts will be sent at no charge from SCC on a 

freight prepaid basis; (2) reimbursement for service labor will be paid if the following conditions have been met - (a) prior approval of  service agency was awarded from the Customer Service Department; 

and (b) an itemized statement of all labor charges incurred is received by the Customer Service Department. The cost of the service labor reimbursement will be based on straight time rates and reasonable 

time for the repair of the defect. 

 

If problems occur with any compressor, notify SCC

s Customer Service Department immediately. Any attempt to repair or alter the unit without prior consent from the Customer Service Department will 

render any warranty claim null and void. This warranty and protection plan does not apply to any condensing unit or any part thereof which has been subject to accident, negligence, misuse, or abuse, or 

which has not been operated in accordance with the manufacturer

s recommendations or if the serial number of the unit has been altered, defaced, or removed. 

 

One Year Limit of Liability: 

During SCC's one-year parts and labor warranty on the original F.O.B. (free on board) unit, SCC is liable for BOTH the equipment and labor costs of repairing or replacing the 

motor compressor and any other components that were included in the original F.O.B. (free on board) unit.  

 

Five Year Limit of Liability: 

After the one-year parts and labor warranty on the original F.O.B. (free on board) unit has expired, a PARTS ONLY warranty on the compressor will continue through 

the fifth year (from the receipt date of the original F.O.B. unit). After the first year of warranty has expired, SCC

s warranty covers compressor and/or compressor PARTS ONLY; it does NOT include 

labor or other costs incurred for diagnosing, repairing, removing, installing, shipping, servicing, or handling of compressor or compressor parts. Furthermore, this warranty will be honored ONLY ONCE 

during the five year period from the original F.O.B. (free on board) unit shipment date.  

TECH SERVICE/WARRANTY CONTACT INFO:    

1 (800) 433-9490 / EXTENSION 1 

 

DAYS/HOURS AVAILABLE: 

MONDAY - FRIDAY (CLOSED HOLIDAYS)  

8:00 a.m. TO 5:00 p.m. EST 

YOU MUST HAVE THE FOLLOWING INFO AVAILABLE 

BEFORE CONTACTING STRUCTURAL CONCEPTS: 

 

SERIAL NO. / MODEL NO. / STORE NO. / STORE 

ADDRESS / DETAILS (PHOTOS, LEAK LOCATIONS, 

DAMAGE, STORE

S AMBIENT CONDITIONS, ETC.) 

29 

Содержание FSC663R






























Отзывы: