UV bulb install in Aquabar 2
1.
Remove 2 screws from back of unit top.
2.
Lift off top to expose SS reservoir lid.
3.
Lift SS lid up and remove silicone plug
(it’s now red).
Screws for
cabinet top
Silicone plug
Step 1
2
3
4.
The reservoir baffle is shipped in a bag inside the filter
compartment. Remove the silicone plug from it as
well, then place baffle into reservoir.
5.
Gently place the UV bulb into the hole in the SS lid.
6.
Thread it in (turn clockwise) until it is snug. You
can lift the black float lid out of the way if you want
more room to work.
Do not force the bulb assembly if it gets stuck
because the threads can get ruined easily. If it is
stuck, unscrew it some and start again. It should
rotate about 3 complete turns to seat fully.
Notch in baffle slides
over tube inside back
of reservoir
