1. Screw in two 10x50 self taping screws.
2. Wall-mount the purifier with the help of slot holes given on backside.
3. Fasten the SS ball valve to ¼ inch port of 3-way connector.
4. Attach the threaded end of 3-way connector to raw water supply
and plug off the other end or connect to a tap.
5. Now connect one end of white pipe to SS ball valve and the
other end to lower elbow fitting connector labeled as WATER IN,
on the Left side of purifier
6. Connect one end of blue pipe to upper elbow fitting connector in REJECT WATER FR
and lead the other end to drain.
7. Connect the purified water pipe to the water cooler.
8. Turn on the lever given on SS ball valve to initiate the water flow to purifier.
9. Allow the filters to pre-soak in the water for 2-3 minutes.
10. Connect the power supply.
11. Installation is complete.
6
Installation Procedure:
Use white pipe for raw water supply
Use blue pipe for reject water.
Electricity
Ro Water
Reject Water
Water
Supply
H - 77.5 CM
W - 35.5 CM
L - 31 CM
