Oase ProfiClear Premium Compact, Руководство по эксплуатации

Страница: 41 / 320

- EN -
41
2.3 Unit configuration

H Pump fed

I Gravity fed Description
1 1 Container cover
2 2 Signal box with level detection device (3) and temperature probe (6)

The signal box is connected to the control system (23, 25)
3 3 Level detection device

Signals the water level in the filter system
4 4 Rollers for guiding the filter drum
5 5 Filter drum with six screen elements

screen elements for coarse dirt down to 80 µm in size (also optionally
available with 60 µm)
6 6 Temperature probe

monitors the water temperature
7 7 Air hose 9 mm
8 8 Hel-X 13 biomedia in moving bed filter chamber
9 9 DN 110 outlet
10 10 Meshed tube

Prevents the Hel-X biomedia from being flushed out
11 11 Aerator rod (two provided)
12 12 Rinsing pump for supplying the rinsing device (21)
13 13 DN 75 dirt outlet with slide valve
14 — 2 x adapters, 2 x 30° inlet bends with union nut for connection of the Bitron
UVC clarifier to 38 mm (1½ ") connections (16)
15 — Connection set for connecting filter pumps, 1 × 38 mm (1½ ") hose connector,
1 × 50 mm (2 ") hose connector, 1 × union nut for hose connector, 1 × 40 …
60 mm hose clip, 1 × 90° (2 ") connection bend, 1 × union nut for connection
bend,
1 × flat seal (2 ") 56 mm × 43 mm × 3 mm
16 — 2 × 38 mm (1½ ") connection, closed with sealing plugs
optional connection for a Bitron UVC clarifier
17 — 1 x 50 mm (2 ") connection for connecting the filter pumps
18 18 DN 110 dirt outlet for coarse dirt
19 19 Drum motor for filter drum

the motor is connected to the control system (23, 24)
20 20 Dirt channel

collects the coarse dirt and rinsing water from the screen elements (5)
21 21 Rinsing device

sprays water at high pressure onto the screen elements (5) to rinse off the
coarse dirt
22 22 Grease for the drum seal
23 23 Control system
24 24 Connector for drum motor
25 25 Connector for signal box
26 26 Power cable
27 27 Connector for rinsing pump
28 28 Fuse holder

Fuse protection of the control system with 5 × 20 mm, T8 A 250 V safety
fuse
— 29 DN 110 inlet
— 30 DN 110 inlet with cover cap, for optional use
— 31 2 × ground stakes for installing the control system
32 32 9/4 mm transition piece
33 33 Tee
34 34 2 × cable binders for fastening the air hoses to the tee