4
Safety and Operating Instructions
OASE Neptun 1600-2600
Thank you for purchasing an OASE water feature pump. OASE pumps were developed through extensive research and
are known world wide for their high-quality construction, energy-efficiency, and environmental safety features. OASE wa-
ter feature pumps do not contain any oil, instead they are cooled and lubricated by water only. Please read the following
instructions carefully and thoroughly. Failure to comply with these requirements may result in pump damage or failure,
and could cause serious or fatal injury. Close attention to these guidelines will result in many years of pleasure from your
OASE pump.
Operational Range
Application:
- Outdoor use
- Koi (Japanese carp species) fish basins
- Garden ponds
- Water Features
- The pump is suitable for the conveyance of water from garden ponds and fish basins and can be used with various water
features.
- This product is not intended for use by children without proper supervision.
- Keep out of the reach of children.
Water Temperature Range:
- 40-85 degrees Fahrenheit (4-35 °C)
Maximum Water Depth:
- 13 ft (4.0 m)
Safety Instructions (S 1)
- Check that the electrical data of the power supply network and that on the type plate coincide.
- Only connect the pump to a grounded power outlet (GFI) in accordance with the valid local or national electrical codes
(NEC, UL, CSA, IEC...). Contact a qualified electrician with any questions.
- Do not use additional components, extension or connection cables or adapters, which are not grounded.
- Never operate the pump while people are in the water.
- Make sure that garden ponds meet the local and national installation regulations. Contact a qualified electrician!
- Remove the power cable from the electrical socket prior to handling the pump.
- Note! In the event of a fault, a maximum of 10 switch-on/off cycles are carried out. Should this prove unsuccessful, the
pump will switch off after approx. 40 seconds. Remove the power plug from the electrical socket and clean pump if ne-
cessary.
- Never carry or pull the pump by the power cord.
- Always keep the connection points (power plug) dry.
- Do not operate the pump if cable or casing shows any signs of damage.
- Lay the connection cable such that it is protected against possible damage.
- To avoid potentially dangerous situations, only the manufacturer is allowed to make repairs or cable replacements.
CAUTION: This pump is for garden use. Do not use in swimming pools, spas, hot tubs, etc. Running dry will inevitably
cause almost immediate failure and void all warranties implied or otherwise.
Electrical Requirements (S 2)
WARNING: OASE pumps MUST be connected to a properly grounded and GFCI (Ground Fault Circuit Interrupter
< 30mA) protected 110-120 Volt AC circuit only. OASE Neptun pumps are equipped with a 20-foot 3-prong electrical cord.
If the electrical cord provided is not sufficient we suggest that you consult a certified electrician and have them install an
additional GFCI outlet within reach of the cord. Consult your local power authority for electrical codes or requirements.
Avoid excessive flexing of or abrasion to the electrical cord. Any alteration to an OASE pump will result in non-compliance
with UL and Canadian UL listings and requirements. In such instances all warranties implied or otherwise are deemed
immediately void.
WARNING (S 3):
Risk of electric shock - This pump is supplied with a grounding conductor and grounding-type attachment plug.
To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type
receptacle.
Do’s and Don’ts (S 4, S 5)
- Do disconnect the plug from the receptacle before moving or cleaning the pump.
- Do disconnect the plug from the receptacle before entering the water area.
- Do have all electrical outlets installed and serviced by a licensed electrician.
- Do disconnect the pump from the electrical outlet at the first sign of any problem.
- Don’t use the pump when there are people in the water.
- Don’t cut the cord or remove the plug from the cord.
- Don’t remove the grounding pin from the plug.
- Don’t carry or pull the pump by the electrical cord.
- Don’t use extension cords.
English
Содержание Neptun 1600
Страница 1: ...Neptun 1600 2600 Warranty Safety and Operating Instructions 27852 08B...
Страница 3: ...A B C D 2...
